LDV eT60 Tyre Reviews

Looking for tyres for your LDV eT60? This page brings together owner reviews, ratings and buying guidance for the tyres Australian LDV eT60 drivers are actually running, so you can compare real-world experience before you commit to a set.

What to look for in LDV eT60 tyres

A ute's tyres have to cope with two very different states: empty and fully loaded. That gap is why load index and pressure management matter more here than on almost any other vehicle. Check what the placard specifies, then check what your tyre actually carries at your running pressure — a load index that only works at 300 kPa is not much use if you run 250 kPa around town.

Tread pattern is the other half of the equation. If the ute is a work vehicle covering long highway kilometres, a highway or all-season pattern will be quieter, last longer and cost less to run. If it tows on gravel, tracks into worksites or does regular beach and bush work, an all-terrain with a reinforced casing is worth the fuel and noise penalty. Look for cut and chip resistance in the reviews, not just tread depth — that is what fails first on sharp gravel.

LDV eT60 tyre sizes and fitment

Tyre sizes for the eT60 vary by model year, variant and wheel option, so the vehicle placard is the specification that matters. It sets out the size, the minimum load index and speed rating, and the correct pressures. You can fit a higher load index or speed rating than the placard calls for, but going below either changes the safety margin the vehicle was engineered with.